Canon printer is not responding

If your Canon Printer not responding then this problem arise from computer, Drivers, Ports, etc.Because if computer is not able to communicate properly then printer will not respond or if you are using wrong port or drivers same problem will occur .

It’s very frustrating that you can’t print anything with your Canon printer because of this issue.

So there are many steps which solve your problem

Do basic troubleshooting

Firstly we need to check the connection and make sure it is connected properly.if you are using USB then check USB is properly connected or try to connect again. Sometime problem may arise by faulty USB for that try to connect your printer with another USB and check whether it is working or not.If you have cable then also try to connect with new cable.

Network printer

If you have network printer for that you need to check network connection status that is connected with WiFi or not as well as devices like router, modem

Troubleshoot

It is very simple step if you have windows 10 click on printer and then you will get option run the troubleshooter click on it and this will fix the problem. After this troubleshooting if your canon printer is not responding then go to next step.

Restart the Print spooler

For that you need to open run box and type services.msc search for print spooler and restart it and check your printer that it is working or not.

Configure new port for your printer

If your canon mg3600 printer not responding there might be because you are using wrong port of your printer.To change the setting of printer port

>>Press windows key +R you will get Run box

>>In Run box type “control”and press “enter” from your key board.

>> Go to “Device and Printers

>>Find your canon printer and make right click on it then click on “Printer Properties

 

>>Click on change properties

 

>>then click on port tab so if you are using usb or cable then the option will be “USB”  or “DOT4” or if you are using wifi printer then option will be “WSD“, “network” or “IP” after that click on apply.This will solve your problem.

Update printer driver

By doing above step still your canon mx920 printer not responding then the last option is you need to update drivers go to canon website search for your printer

Check for update and update the printer drivers

This will fix your problem if you are not tech savvy then please visit our website printer support or you can simply call you will get instant support for your printer.

Comments

Popular posts from this blog

What is WPS Pin and the way to seek out it on HP Printer?

HOW to found out WPS Pin on HP Pinter?